• Stranded copper wire, bare, tinned, silver or nickel-plated
• Make-up fine wire stranded to IEC 60228 cl. 5
• Core insulation to DIN VDE 207 part 6
• Cores colour coded
• PTFE as per MIL-W 16878
• Higher insulation resistance
• Low dielectric loss
• Not flammable
• Min. 20 kV dielectric strength
• Resistant to micro-cultures
• Do not permit any fungus-formation
• Absolute ozone resistant
• Absolute weather resistant
• Water absorption <0,01 %
• Minimal water vapour permeability (approx. 0,18 mgr/cm2 in 24 hours)
• Self-extinguishing and flame retardant according to IEC 60332-1B
• Please complete the above part-no. for the colour required using the following table: 1 = black, 2 = red, 3 = blue, 4 = brown, 5 = white, 6 = transparent, 7 = twintone, 8 = other colours.

• Fluorinated polymeric insulation PTFE (Polytetrafluorethylene)
• Design to DIN VDE 0881 an IEC 60673
• Temperature range -190°C to +260°C (up to +300°C for short time)
• Nominal voltage type E = 600 V type EE = 1000 V
• Test voltage 2500 V
• Insulation resistance min. 1 GOhm x km
• Minimum bending radius 10 x cable Ø
• Radiation resistance
  up to 1x106 cJ/kg (up to 1 Mrad)
• Conductor temperature range
  • plain copper +130°C
  • tinned copper +180°C
  • silver pI. copper +200°C
  • nickel pI. copper +300°C

Mostly used for installation in control cabinets or appliances that are subjected to the high thermal effects. The cable is characterized as non-flammable and also resistant to acids, petrol, oil, solvents and alkalis.